![]() ![]() IF your laptop supports SATA hot-plugging (some don't), then your hard drive will become available and you can use hdparm to remove the password from the drive.Once the system has booted, reconnect the SATA cable to the hard drive.With the SATA cable disconnected, power the computer up and boot from the CD or flash drive you made in step 1.With the computer turned off, unhook the SATA cable from the affected hard drive.There are many tools and ISOs available on the Internet for this. Burn yourself a Linux Live CD or make a bootable Linux USB flash drive.It depends on whether or not the USB controller in the enclosure will reject the commands. Issuing ATA commands to a SATA drive in a USB enclosure may fail. Please note, a USB enclosure may not work. That means if you can get around the BIOS, you can access the drive. Fortunately, the ATA security spec is only enforced by the BIOS, not the drive itself. This is a "feature" of many BIOS implementations.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |